ROASTED ALDER bass guitar 2-pc body blank, 36 mm

Wood: ALDER Alnus, dimensions:

width: total 33,5 cm

length: 53,5 cm

thickness: 36 mm

density: 460 kg/m3

(2-pc set of alder wood, medium density, unglued / unjointed, roasted in oxygen-free conditions, drawing shows a Precission-type body shape, thickness 36mm is a good base for laminated bass guitar body. Roasting process caused a very old wood colour, few words about wood roasting can be found below in the description. ATTENTION! – you will need to add 1-2 mm in the marked place)…

Intended for electric bass guitar body or other instrument under which you can use the item shown. The pictures show this particular set of wood. Dry, pre-sanded surfaces, ready for use. Dimensions for own purposes to be carried out independently. As always when working with wood, we recommend the domestication it at the place of destination for a period of several weeks. Everyone, even the most stable type of wood is not indifferent to changes in humidity, temperature and other external factors.

About wood roasting

The wood, after a period of about 2 years of seasoning, was subjected to a process of slow vacuum drying to a moisture content of approx. 7%. After drying, it was roasted in an anaerobic chamber at a temperature up to 167 °C. This treatment is a technically accelerated process of long-time ageing of wood, which is aimed at increasing the hardness, stiffness and stability of wood. In addition, the hardened wood structure and closed pores make it difficult to absorb moisture from the air, a moisture is not indifferent to any wood. This is particularly important in the case of maple wood in various varieties, which is highly unstable in changing conditions (temperature, humidity). The side effect of the baking process (for some, a great plus) is the darkening of a wood and the characteristic smell, reminiscent of roasted coffee grains. The darkening and the smell are more intense, the higher roasting temperature is. About the tone, roasted wood theoretically only gains, and whether it really is ... this one will find out who will check it. Baked wood is especially recommended for necks and soundboards in musical instruments. We liked the baked wood in the Woodforguitar very quickly. "Roasted wood"… this is it.

Other names for roasted wood: torriefied, thermo-aged, carmelized, thermo-modified, baked, postarzane, termowane.

Additional information:

Other names: Olcha, Alder

Alder occurs in many different varieties, practically almost all over the world. The wood of this tree is used to produce guitar / bass bodies as relatively cheap wood with excellent and versatile sound qualities. It is characterized by an equal characteristic, it does not emphasize low frequencies or high, has a very nice base and a wide center. Known for years, often also underestimated and treated by many as something too common, ordinary. And quite wrongly, if good wood is relatively readily available and costs a little (it will not cost a little any more…), it should be appreciated and learned to use it. Alder from Poland sounds great, we recommend the Polish alder.

Ostrzeżenia i bezpieczeństwo związane z produktem

Product warnings and safety

Oferowany produkt jest materiałem pochodzenia naturalnego i jest przeznaczony do dalszej samodzielnej obróbki przez kupującego. Podczas obróbki należy zachować szczególną ostrożność i stosować środki ochrony indywidualnej, jak: gogle ochronne, maseczka przeciwpyłowa, rękawice, buty z ochronnym noskiem, a także inne – w zależności od wykonywanej czynności.

Reakcje alergiczne – mogą wystąpić różne reakcje alergiczne, w przypadkach szczególnych należy zgłosić się po poradę medyczną.

Podrażnienie oczu – może wystąpić podrażnienie oczu, unikać dostania się pyłu z obrabianego przedmiotu do oczu.

Drzazgi – istnieje ryzyko wbicia się drzazgi w ciało, drzazgi należy usuwać na bieżąco, a rany odkażać.

Ryzyko zranienia – zachować szczególną ostrożność, niektóre kanty mogą zranić przy nagłym kontakcie

Dzieci – chronić przed dziećmi, przedmiot nie jest przeznaczony do zabawy.

Przechowywanie – przechowywać w suchym i przewiewnym miejscu.

Utylizacja – utylizować zgodnie z lokalnymi przepisami dotyczącymi odpadów.

Bezpieczeństwo pożarowe – przedmiot palny, trzymać z dala od źródeł ognia i wysokich temperatur.

The offered product is a natural material and is intended for further processing by the buyer. During processing, special care should be taken and personal protective equipment (PPE) should be worn, such as safety goggles, a dust mask, gloves, safety shoes, and other appropriate protective equipment, depending on the activity being performed.

Allergic reactions – various allergic reactions may occur; in special cases, seek medical advice.

Eye irritation – eye irritation may occur; avoid getting dust from the workpiece in your eyes.

Splinters – there is a risk of splinters becoming embedded in your skin; splinters should be removed immediately and wounds disinfected.

Injury risk – exercise extreme caution; some edges may cause injury upon sudden contact.

Children – keep out of reach of children; this item is not intended for play.

Storage – store in a dry and well-ventilated place.

Disposal – dispose of in accordance with local waste regulations.

Fire safety – flammable item; keep away from sources of ignition and high temperatures.

Producent/odpowiedzialność za produkt

Manufacturer/product liability

Wszystkie produkty dostępne na stronie internetowej „Wood For Guitar”/woodforguitar.com

All items available on the "Wood For Guitar" website/woodforguitar.com

TOMASHEK Tomasz Wojtowicz

Legionów Polskich 137/37

41-310 Dąbrowa Górnicza

Polska

Tomasz Wojtowicz

Tel. +48/ 882803692

woodforguitar@gmail.com